25 Responses to “Woodworking : How to Carve Wood”

1. doberman74 says:

   January 24, 2012 at 11:07 pm

   @sheritharp

   agreed… notice the huge deep scab on his right hand:/
2. falloutentity says:

   January 25, 2012 at 12:03 am

   @sheritharp Yes very scary.
3. xenopeltismulticolor says:

   January 25, 2012 at 12:29 am

   The top two comments are not totally different opinions.
4. iampeeay01 says:

   January 25, 2012 at 12:41 am

   is it necessary to use soft wood when carving???
5. PRINCESSicecubeDEMON says:

   January 25, 2012 at 1:28 am

   two top comments are two totally different opinions –__–
6. sheritharp says:

   January 25, 2012 at 1:36 am

   I have been teaching woodcarving for almost 30 years and this gentleman has broken almost everyone of my safety rules in under 3 minutes. Be careful folks.
7. beratio says:

   January 25, 2012 at 2:33 am

   ever seen a wooden handmade buster cyl ? watch?v=yfIFKHdpdZ8
8. BaronSalsa says:

   January 25, 2012 at 2:59 am

   he sure knows how to work a piece of wood
9. TheAk47wolf says:

   January 25, 2012 at 3:51 am

   This video should be called how to waste 2:46 sec of your life!
10. xMineguyx says:

    January 25, 2012 at 4:19 am

    i want to make a model boat will this help?
11. littlebit19801 says:

    January 25, 2012 at 5:16 am

    I’m wanting to carve out a groove in wood in the shape of a fleur de liz. *sp* Then I want to nail tacks down in the groove to form the design, so that the tacks will be sunk down into the wood, can I use this technique for that?
12. bossman12334 says:

    January 25, 2012 at 5:37 am

    what kind of wood do u suggest?
13. stefann1989v2 says:

    January 25, 2012 at 6:28 am

    the one who filmed this is a complete retard. show us what he is doing, retard.
14. Maxi3242 says:

    January 25, 2012 at 6:50 am

    wiggle jizzle xD 1:38
15. MrDaAsif says:

    January 25, 2012 at 7:24 am

    @HandsomeSasquatch DON’T
16. galletinN says:

    January 25, 2012 at 8:21 am

    @poopingpenguin1 what if i dont have a closet??
17. odmcarp says:

    January 25, 2012 at 8:36 am

    @HandsomeSasquatch yes, that’s bad. not a good idea at all. don’t do it.
18. poopingpenguin1 says:

    January 25, 2012 at 8:53 am

    In 1908 a lady was looking for her dog and a a ghost came and killed her if you don’t post this on 6 different videos in30 mins you will find a bloody body in your closet
    Good luck
19. Leafblower258 says:

    January 25, 2012 at 9:05 am

    IM NOT TRYING TO ADVERTISE BUT IM SCARED OF WHAT IT SEES in 1908 a lady named sally rusa was in the woods looking for a dog until a ghost came and killed her so if ur reading this u will find a bloody body in your closet hanging there haunting you and will kill you and ur family and if u want to stop this just sends this to 6 videos in 30 mins or this will happen good luck!!
20. SpaceRogue80 says:

    January 25, 2012 at 9:49 am

    @HandsomeSasquatch It could be. Some stains have very toxic materials. I would play it safe and NOT use the cup for drinking out of. If it was more recent I would say get the MSDS for the stain that was used to see what the chemical makeup is. It was a good question.
21. hyrum2328 says:

    January 25, 2012 at 10:12 am

    Where is your protecting glove on the hand opposite the cutting tool?
22. Naruchiha64 says:

    January 25, 2012 at 10:45 am

    @thenda8 Too bad it’s called a chisel. He even said that.

    Dur.
23. 1988Zachariah says:

    January 25, 2012 at 10:49 am

    @thenda8 And it’s obviously not a screwdriver….lol
24. 1988Zachariah says:

    January 25, 2012 at 11:15 am

    @canitD123 Moron…
25. thenda8 says:

    January 25, 2012 at 11:23 am

    @canitD123 to bad it’s called a flathead screwdriver